Product Finder

PopPack LED

  • PopPack LED
  • PopPack LED

PopPack LED batten

  • LED one for one replacement for single and twin T8/T5 (35W up to 80W) fluorescent batten
  • Up to 67% energy reduction vs traditional switch start
  • Further savings can be achieved via the DALI dimmable version in combination with remote presence/daylight sensors.
  • Over 110lm/W - exceeding building regulation requirements

Materials and Finish

Batten: pre-coated roll form steel, white (RAL9016)
End caps/lamp holders: injection moulded polycarbonate, white
Diffuser: textured opal acrylic

Installation and Mounting

3(+2)/4(+2) way terminal blocks with capacity for loop in/out 2.5mm² cables. Detachable LED engine for easy installation. Ambient temperature: -20 to +25°C for the standard product, 0 to 25°C for the emergency versions, normal, dry, indoor atmospheres. Fixation to central BESA fixing or entrance through spine. Through wiring possible through knock out holes in the spine and end caps. Easy alignment through slots in the spine. Bare battens can be mounted end to end (except emergency versions - recommended minimum space between luminaires 50mm).

Specification

To specify state:
LED batten with a detachable LED engine. Switchable or DALI ballast, integral emergency and sensor versions available.
As Thorn PopPack LED

New Product
LumExpress Product
eControl Product

PopPack LED battens

PopPack LED battens, dimmable

PopPack LED battens, emergency

PopPack LED battens, dimmable, emergency

PopPack LED battens, with sensor

PopPack LED Accessories