Aquaforce Pro / AQFPRO L LED6400-840 PC WB HF E3


Data Sheet

An IP66, dust and moisture resistant LED luminaire. Electronic, fixed output control gear with 3 hour, manual test, emergency lighting circuit. With wide beam distribution. Class I electrical. Canopy: light grey polycarbonate. Diffuser: high transmission opal polycarbonate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. ambient temperature: 0°C to +25°C. Complete with 4000K LED..

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1600 x 92 x 90 mm
Luminaire input power: 51.4 W
Luminaire luminous flux: 6710 lm
Luminaire efficacy: 131 lm/W
Weight: 2.5 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:6710 lm
  • Total emergency luminous flux:500 lm
  • Luminaire efficacy*:131 lm/W
  • Lamp efficacy:130 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 87500785 DRV TR LC 54W 350mA 153V F #fixC sl SNC
  • Ballast 2:1 x 89800581 EM TR EM converterLED BASIC 204 MH/LiFeP
  • Correlated colour temperature:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 50000h at 25°C
  • Luminaire input power*:51.4 W Power factor = 0.96
  • Charging power:3.7 W
  • Dimming:FO
  • LED
  • CE
  • D
  • ENEC
  • Food
  • 850°
  • Hfree
  • IK08
  • IP66
  • RCM
  • Electrical class I


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result