Optus IV Surface / OPTUS IV D 1X28W HF WHI DSB IP23

96203592

Data Sheet

A surface mounted and suspended luminaire with a modern slim design, specially developed for use in laboratory environments. For 1 x 28W T16 lamp(s) with electronic - fixed output ballast. Rated IP23, Class I electrical. Body in extruded Aluminium with powder coated matt white finish. End caps in die-cast zinc, and satinbrite louvre in anodised Aluminium. 3 x 2 x 2.5 mm² piano key terminal block and cable clamp. Key hole fixing centres 1000mm. Lamps to be ordered separately.

Total power: 30.6 W
Dimensions: 1209 x 165 x 61 mm
Weight: 3.4 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:1 x T16 / 28W
  • Luminaire luminous flux*:2046 lm
  • Lamp luminous flux:1 x 2600 lm
  • Luminaire efficacy*:67 lm/W
  • Lamp efficacy:85 lm/W
  • Colour Rendering Index min.:80
  • Ballast:1x HF Tridonic PC T5 PRO LP
  • Luminaire input power*:30.6 W Lambda = 0.98
  • CELMA EEI:A2
  • Maintenance category:C - Closed Top Reflector
  • T16
  • CE
  • EAC
  • ENEC
  • IP23
  • RCM
  • Electrical class I

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)