CiviTEQ / CQ 24L50 740 EWR BS 3550 CL1 M42 GY-S

96665469

Data Sheet

A small size LED road lighting lantern with 24 LEDs driven at 500mA with Extra Wide Road optic. Electronic, fixed output control gear. Class I electrical, IP66, IK08. Housing: die-cast aluminium (EN AC-44300), Light grey 150 sanded textured (close to RAL9006). Enclosure: toughened flat glass. Screws: stainless steel, Ecolubric® treated. Supplied with Ø42mm spigot adaptor which can be fitted for post-top (0°/5°/10° tilt) or side-entry (-20°/-15°/-10°/-5°/0° tilt). Equipped with 50% power reduction circuit, effective 3 hours before and 5 hours after a calculated midnight. It can be deactivated at installation with an easily accessible internal switch. Complete with 4000K LED. Surge protection: 10kV single pulse common mode and 8kV multipulse common mode and 6kV multipulse differential mode. If permanent DALI system is connected, 6kV multipulse common and differential mode.

Dimensions: 390 x 230 x 133 mm
Luminaire input power: 38 W
Luminaire luminous flux: 5669 lm
Luminaire efficacy: 149 lm/W
Weight: 5.4 kg
Scx: 0.077 m²

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:5669 lm
  • Luminaire efficacy*:149 lm/W
  • Colour Rendering Index min.:70
  • Ballast:1 x 87500663 LCA 60W 350-1050mA one4all C PRE OTD
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):5
  • Rated useful life (B10)*:L90 100000h at 25°C
  • Luminaire input power*:38 W Power factor = 0.9
  • Dimming:FO
  • LED
  • CB
  • CE
  • EAC
  • ENEC11 +
  • ENEC11
  • GLedReP
  • IK08
  • IP66
  • Coastal_C5
  • LLedNr
  • RCM
  • Electrical class I
  • Ta=25

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)