Isaro Pro / IP 24L70-730 NR BPS CL2 M60 ANT

92902120

Data Sheet

A state of the art LED road lighting lantern (small) with 24 LEDs driven at 700mA with Narrow Road optic. LED driver. Class II electrical, IP66, IK09. Housing: die-cast aluminium (EN AC-44300), powder coated textured anthracite (close to RAL7043). Spigot: die-cast aluminium (EN AC-44300), powder coated textured anthracite (close to RAL7043). Enclosure: 5mm thick glass. Fixings: stainless steel. Supplied with Ø60mm spigot adaptor which can be fitted for post-top (0°/5°/10°/15°/20° tilt) or side-entry (-15°/-10°/-5°/0°/5°/10°/15° tilt). Equipped with 50% power reduction circuit, effective 3 hours before and 5 hours after a calculated midnight. It can be deactivated at installation with an easily accessible internal switch. Complete with 3000K LED. Surge protection: 10kV single pulse common mode and 8kV multipulse common mode and 6kV multipulse differential mode. If permanent DALI system is connected, 6kV multipulse common and differential mode.

Dimensions: 571 x 224 x 114 mm
Luminaire input power: 53 W
Luminaire luminous flux: 6827 lm
Luminaire efficacy: 129 lm/W
Weight: 5.53 kg
Scx: 0.054 m²

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:6827 lm
  • Luminaire efficacy*:129 lm/W
  • Lamp efficacy:128 lm/W
  • Colour Rendering Index min.:70
  • Ballast:1 x 87500663 DRV TR LCA 60W 1.05A 85V D
  • Correlated colour temperature:3000 Kelvin
  • Chromaticity tolerance (initial MacAdam):5
  • Rated useful life (B10)*:L95 100000h at 25°C
  • Luminaire input power*:53 W Power factor = 0.98
  • Dimming:PROG
  • LED
  • CE
  • ENEC11
  • IK09
  • IP66
  • Coastal_C5
  • RCM
  • SC2 - Protection Class 2
  • Ta=35°C

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)