278
E/Fact
A series of square or circular
recessed walk-over luminaires
compliant with EN60598-2-13:
limited surface temperatures
•Designed in accordance with the
new contact temperature norm:
<100°C for conventional versions
and <40°C for LED versions.
•Sealed to IP67 with die-cast
aluminium body. Wide choice
of sizes, frames, mounting
depths, light sources and control
technologies to suit application
•Tilting angle adjustment for semi-
frosted glass versions (except
asymmetrical light distribution
(A/S) and E/Fact1 18W TC-T)
•Integral power supplies, except
E/Fact 0 20W QR-CBC which
needs an external 12Vac and E/
Fact 1 RGB
Materials/Finish
Bodies: die-cast aluminium,
ENAB44100 (copper free) with
powdered paint finish for high
corrosion resistance. Frame: Stainless
steel AISI 316L (3mm thick) treated
against corrosion or painted
aluminium. Retaining screws: stainless
steel. Front glass: toughened semi-
frosted or frosted sodic glass.
Glass thicknesses:
E/Fact 0: 8mm.
E/Fact 1: 10mm.
E/Fact 2: 12mm.
E/Fact Slim 00: 8mm.
E/Fact Slim 1: 8mm.
E/Fact Slim 2: 10mm.
E/Fact Slim 3: 15mm.
Gasket: anti-ageing silicon
Recessing box: polypropylene
Cable for Slim versions:
H07RN-F, 1m for size 00 and 0.5m
for E/Fact Slim size 1, 2 and 3.
Dome window attachments: painted
aluminium and polycarbonate dome
only for round E/Fact size 0.
Prismatic dome: toughened glass
only for round E/Fact size 0 with
aluminium frame. Anti-slip glass on
request. Holographic films: non-
yellowing polycarbonate.
All versions have integral power
supply, except E/Fact 0 20W QR-
CBC which needs an external 12Vac.
All versions have electronic ballast
except:
E/Fact size 1: 18W TC-T
E/Fact size 2: 26W TC-T and
35W/70W HIT
Installation/Mounting
In-ground installation:
Luminaire delivered complete with
body, recessed box, frame and glass.
For the Slim versions, the product is
pre-wired. For outdoor applications,
30cm drainage gravel or any
equivalent drainage system must be
used beneath the housing to ensure
water evacuation. The recessed box
can be embedded in asphalt with
good drainage once the temperature
of the asphalt is approximately
80°C. Luminaire must be operated
for 45 minutes without its front glass
to avoid moisture building-up inside
the housing.
In accordance to the norm
EN60598-2-13, the maximum static
load is 1000kg. Glow wire is 750°C.
Ceiling or wall installation:
Due to clips and safety cable
accessories (to be ordered
separately), all E/Fact versions
can be installed in ceiling. Only E/
Fact 0 and E/Fact Slim size 00 can
be used in wall. Colour change
RGB lighting technology available
for E/Fact1 with a remote gear
box and integral in E/Fact 2. For
RGB versions, LEDs are driven
by DMX control (not supplied).
To facilitate quick installation, the
wiring can be done via IP67 wiring
connectors (SAP codes 96257910 or
96257911). For through wiring, IP67
connection boxes can be used (SAP
codes 96257907, 96257908 or
96257909).
Holographic film set up in LED
versions only: open the front glass
and insert the holographic film under
the glass thanks to the gasket with the
smooth side of the film in contact of
the glass. Rotate the film to obtain the
required light effect.
Specification
To specify state:
Square and round recessed, low
temperatures, walk-over luminaires
with integral transformer, except for
20W QR-CBC, 7 sizes, 4 standard
and 3 pre-wired shallow versions.
Polypropylene recessed box and flat
stainless steel/flat or dome windows
painted aluminium frames. Die-cast
aluminium body sealed to IP67.
Choice of lamp types/LED versions.
With a choice of 3 monochromatic
colours for size 00, 0, 1, 2 and Slim
size 3. Dynamic RGB versions for
size 1 and 2 driven by DMX driver
(included). Other DMX components
ordered separately.
For ground installation with front
semi-frosted flat glass enclosure
for illumination or frosted glass/
dome/dome windows for guidance.
Holographic films for LED versions
only.
As Thorn E/Fact and E/Fact Slim.
