512
Connect Distribution
Units
A simple wiring aid to
help reduce the cost of
installing a lighting system
Modular Distribution Unit
Presence detector
Up to 10/12 luminaires
connected by flying lead
Mains supply
wall switch connection
Key switch to test emergency lights
Typical marshalling box
installation showing all the
features available.
Distribution Unit DUS10
Distribution Unit DUA10 B
Distribution Unit DUC10
Distribution Unit DUP 125
Simple junction box to connect
mains feed to all 10 luminaires in
two groups of 5, or one group of
up to 10 luminaires (depending on
switching capacity of PIR if used),
via slim, latched, GST18
connection leads.
Simple junction box to connect
mains feed to all 10 luminaires in
two groups of 5, or one group of
up to 10 luminaires (depending on
switching capacity of PIR or dimming
capacity of SensaDigital/SensaLink
head if used), via slim, latched,
GST18 connection leads. Ideally
suited for SensaDigital and SensaLink
digital luminaires, SwitchDim and
other digital dimming systems.
The DUC10 controls up to
10 luminaires. The unit is a 3
channel device, channel A has 4
luminaire outputs, channel B has
2 luminaire outputs and channel
C has 4 luminaire outputs. There
are corresponding inputs on each
channel for presence detectors
(RJ45) and SELV switch inputs via
pluggable connectors. Additional
pluggable connections allow the
testing of emergency fittings and
connections for corridor hold.
The DUC10 can be configured to
work in various combinations.
The DUP125 is an intelligent
connection box providing
connections for up to twelve
luminaires, up to five detectors and
up to five switch inputs. The unit is a
6 channel device, channel 1 and 2
have 3 luminaire outputs. Channel 3
and 4 have single luminaire outputs.
Channel 5 and 6 have 2 luminaire
outputs. The unit is designed to
simplify installation whilst providing
an intelligent managed lighting
system, including provision for
emergency lighting. The DUP125 can
be programmed to work in various
combinations.
