Voyager Solid / Voyager SOLID L P MS HP E3BC WH


Data Sheet

IP65 LED safety luminaire for surface ceiling mounting. Semi-recessed mounting possible with optional mounting frame. Electronic, fixed output control gear Luminaire with local battery supply for 3h emergency lighting in maintained or non-maintained mode with integrated radio module basicDim Wireless (Casambi) for wireless communication with central monitoring system. Radio frequency: 2.4...2.483 GHz, Radio power: +4 dBm. Body: polycarbonate. Cover: transparent polycarbonate. Class II electrical.

Self-contained emergency luminaires rely on long-lasting batteries. Voyager Solid's high-tech battery is robust and comes with a three-year guarantee (applicable subject to the terms and conditions of and to the extent as set forth in the manufacturer's guarantee on Thorn products, which shall be applicable analogously and which is available under The battery guarantee shall not come into effect if the product has been installed later than three(3) months after delivery EXW (Incoterms 2010).

Dimensions: 360 x 150 x 71 mm
Luminaire input power: 12.5 W
Weight: 1.6 kg

Mode selection
  • Lamp position:Without opal insert
  • Light Source:LED
  • Luminaire luminous flux*:800 lm
  • Luminaire efficacy*:64 lm/W
  • Colour Rendering Index min.:80
  • Correlated colour temperature*:6400 Kelvin
  • Rated median useful life*:L90 50000 h at 25 °C
  • Ballast:1x EL2
  • Luminaire input power*:12.5 W Power factor = 0.95
  • Charging power:3.66 W
  • Dimming:FO
  • Maintenance category CIE 97:D - Enclosed IP2X
  • LED
  • ED 2014/53/EU
  • CE
  • IK07
  • IP65
  • RG1
  • Ta=-20°C_to_+40°C


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result