Home / Products / Indoor Lighting / Downlights / Cetus / Cetus S, emergency / CETUS3 S LCS HF E3 RWH

Cetus / CETUS3 S LCS HF E3 RWH

92943782

Change configuration

  • Base: 92943782 — CETUS3 S LCS HF E3 RWH

Data Sheet

A low height, recessed LED downlight. Suitable for ceiling cut-outs Ø95-125 mm for easy refurbishments or fast initial installations. Remote, pluggable, Fixed output LED driver with 3 hour, manual test, emergency lighting circuit. Body: die-cast aluminium for thermal management. Diffuser: polycarbonate, smooth reflector in finish with wide beam. Reflector and trim: high quality, highly reflective polycarbonate. Class II electrical, IP43_IP20. Spring clips suitable for ceiling thicknesses from 1 to 25 mm.

For installation in concrete ceilings please contact sales
Equipped with LCS technology, with two lumen outputs (800lm and 1500lm) and three colour temperatures (3000K, 3500K and 4000K) selectable from below by a rotary switch. Pre-set to 4000K, high luminous flux.

Dimensions: Ø137 x 80 mm
Luminaire input power: 15.9 W
Luminaire luminous flux: 1509 lm
Luminaire efficacy: 95 lm/W
Weight: 0.57 kg

Mode selection
  • Lamp position:LCS High 840
  • Light Source:LED
  • Luminaire luminous flux*:1509 lm
  • Total emergency luminous flux:450 lm
  • Luminaire efficacy*:95 lm/W
  • Colour Rendering Index min.:80
  • Ballast:1 x 89800687 EM powerLED BASIC FX SC LiFePO4 32 W
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 50000 h at 25 °C
  • Luminaire input power*:15.9 W Power factor = 0.87
  • Charging power:1 W
  • Dimming:FIX
  • Maintenance category CIE 97:C - Closed Top Reflector
  • LED
  • CE
  • EAC
  • NoIsol
  • GLedReP
  • 850°
  • Hfree
  • IK03
  • IP43_IP20
  • LLedReP
  • RCM
  • RG1
  • SC2 - Protection Class 2
  • Ta = +5 to +25
  • UKCA

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)