Aquaforce Pro / AQFPRO S LED2900-840 PC MB HFI E3DUK

92902217

Data Sheet

An IP66, dust and moisture resistant LED luminaire. DALI/DSI dimmable DALI dimmable Luminaire with local battery supply for 3 h emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI, display of luminaire status via status LED. With medium beam distribution. Class I electrical. Canopy: light grey polycarbonate. Diffuser: high transmission opal polycarbonate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Approved for indoor use or in canopied outdoor areas (see installation instructions). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Suitable for through wiring with H05VV or NYM cable (rated 10A). ambient temperature: 0°C to +25°C. Complete with 4000K LED..

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1100 x 92 x 90 mm
Luminaire input power: 22.9 W
Luminaire luminous flux: 2950 lm
Luminaire efficacy: 129 lm/W
Weight: 2.1 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:2950 lm
  • Total emergency luminous flux:610 lm
  • Luminaire efficacy*:129 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28000655 LCA 50W 100-400mA one4all lp PRE
  • Ballast 2:1 x 89800638 EM converterLED PRO 204 MH/LiFePO4 250V
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 100000 h at 25 °C
  • Luminaire input power*:22.9 W Power factor = 0.9
  • Dimming:HFI-X dimmable to 1%
  • Maintenance category CIE 97:E - Dust-proof IP5X
  • Total harmonic distortion (THD):19.00 %
  • LED
  • CB
  • CE
  • D
  • ENEC11
  • Food
  • GLedReP
  • 850°
  • Hfree
  • IK08
  • IP66
  • LLedReP
  • RCM
  • Electrical class I

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)