Katona / KAT RD SE 1200-840 MWS E3

96632487

Data Sheet

A round functional LED luminaire with deep body for side entry wiring capability, can be used with up to Ø20mm surface mounted conduit. LED driver with 3 hour, manual test, emergency lighting circuit. Body: white polycarbonate. Diffuser: opal polycarbonate. Class II electrical, IP66, IK10. With integral motion sensor for on/off control. Complete with 4000K LED. Suitable for direct mounting to wall or ceiling. Loop-in, loop-out is possible for cables up to 2.5mm². BESA compatible.

Dimensions: Ø328 x 84 mm
Total power: 11.7 W
Luminaire luminous flux: 1250 lm
Luminaire efficacy: 107 lm/W
Weight: 0.19 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:1250 lm
  • Total emergency luminous flux:160 lm
  • Luminaire efficacy*:107 lm/W
  • Lamp efficacy:106 lm/W
  • Colour Rendering Index min.:80
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam)*:3
  • Rated median useful life*:50000h L80 at 35°C
  • Ballast:1x LED_DRV Tridonic LC
  • Luminaire input power*:11.7 W Power factor = 0.91
  • Charging power:2.5 W
  • LED
  • CB
  • CE
  • D
  • ENEC11
  • 850°
  • IK10
  • IP66
  • RCM
  • SC2 - Protection Class 2
  • Ta = 0 to +25

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)