Isaro Pro / IP 12L35-740 WR BPS CL2 T60F ANT W6

96275973

Data Sheet

A state of the art LED road lighting lantern (small) with 12 LEDs driven at 350mA with Wide Road optic. LED driver. Class II electrical, IP66, IK09. Housing: die-cast aluminium (EN AC-44300), powder coated textured anthracite (close to RAL7043). Spigot: die-cast aluminium (EN AC-44300), powder coated anthracite (close to RAL7043). Enclosure: 5mm thick glass. Fixings: stainless steel. Supplied with Ø60mm spigot adaptor pre-fitted for post-top, 5° tilt. Equipped with 50% power reduction circuit, effective 3 hours before and 5 hours after a calculated midnight. It can be deactivated at installation with an easily accessible internal switch. Pre-wired with 6m cable. Complete with 4000K LED. Surge protection: 10kV single pulse common mode and 8kV multipulse common mode and 6kV multipulse differential mode. If permanent DALI system is connected, 6kV multipulse common and differential mode.

Dimensions: 571 x 224 x 114 mm
Total power: 15 W
Luminaire luminous flux: 1959 lm
Luminaire efficacy: 131 lm/W
Weight: 6.24 kg
Scx: 0.05 m²

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:1959 lm
  • Luminaire efficacy*:131 lm/W
  • Lamp efficacy:130 lm/W
  • Colour Rendering Index min.:70
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam)*:5
  • Rated useful life (B10)*:100000h L95 at 25°C
  • Ballast:1x LED_DRV
  • Luminaire input power*:15 W Power factor = 0.83
  • LED
  • CE
  • ENEC11
  • IK09
  • IP66
  • RCM
  • SC2 - Protection Class 2
  • Ta=50°C

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)