Home / Products / Outdoor Lighting / Road Lighting / Isaro / Isaro Extra Small, Narrow road optic / IS XS 12L25-730 NR CL1 WS0.3 M60 GY-S

Isaro / IS XS 12L25-730 NR CL1 WS0.3 M60 GY-S


Data Sheet

A discrete and flexible road and street lantern with durable high performance. Programmable LED driver, set for fixed output, driving 12 LEDs at 250mA. Body: extra small size, die-cast aluminium (EN AC-44300), powder coated textured Light grey textured (150) - partly painted. Shaft: Light grey textured (150) - partly paintedunpainted. Cover: Extra White glass. Fixings: stainless steel with anti-galvanic treatment. narrow road optic, with Colour Rendering Index min.: 70, Correlated colour temperature*: 3000 Kelvin LEDs supplied. Class I electrical, Impact strength: IK08, IP66, Ta max.: 50°C. Supplied with Ø60mm spigot adaptor which can be fitted for post-top (0°/5°/10° tilt) or side-entry (-20°/-15°/-10°/-5°/0° tilt). Pre-wired with 0.3m, 1.5mm² H07RN-F cable.

Dimensions: 508 x 180 x 157 mm
Luminaire input power: 11 W
Luminaire luminous flux: 1342 lm
Luminaire efficacy: 122 lm/W
Weight: 3.1 kg
Scx: 0.028 m²

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:1342 lm
  • Luminaire efficacy*:122 lm/W
  • Colour Rendering Index min.:70
  • Ballast:1 x 87500875 LCO 14/100-500/38 NF C ADV3
  • Correlated colour temperature*:3000 Kelvin
  • Chromaticity tolerance (initial MacAdam):5
  • Rated useful life (B10)*:L90 100000h at 25°C
  • Luminaire input power*:11 W Power factor = 0.97
  • Dimming:PROG
  • LED
  • CE
  • GLedReP
  • IDA
  • IK08
  • IP66
  • Coastal_C5
  • LLedReP
  • RCM
  • Electrical class I
  • Ta=50°C
  • UKCA


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result